Specifikacija

Item Type:

Battery Capacity Tester

Material:

Cold Rolled Steel

Plug Attributes:

100-240V AC

Power Supply Mode:

DC 19V-20V, Current Above 3.5A

Discharge Voltage:

0.00-30.00V, The Minimum Step is 0.01V

Charging Voltage:

0.10-18.00v, The Minimum Step is 0.01V

Discharge Current:

0.10-20.00A, The Minimum Step is 0.01A (The current is automatically limited when the power exceeds the limit)

Charging Current:

0.10-5.00A, The Minimum Step is 0.01A (The maximum current above 10V is less than the power supply current)

DSC-CC Mode (Constant Current Discharge):

constant discharge current, used to test battery capacity.

DSC-CP Mode (Constant Power):

The discharge power is constant, used to simulate constant power equipment.

CHG-CV Mode (Constant Voltage Charging):

Constant current and constant voltage charging, supporting lithium battery and lead-acid.

Automatic Charge and Discharge:

Support Automatic Charge-Discharge-Charge Mode

Voltage Measurement:

0.000-4.500V (Low Voltage Range), Accurate to 0.003V, Error ±0.5%; 4.50V-30.00V (High Voltage Range), Accurate to 0.01V, Error ±0.5%.

Current Measurement:

0.10-20.00A, Accurate to 0.01A, Error ±0.5%

Capacity Measurement:

Within 10Ah, The Resolution is 0.001Ah; 10Ah-100Ah, The Resolution is 0.01Ah; Above 100Ah, The Resolution is 0.1Ah.

Wiring Mode:

Four-Wire Detection

Liquid Crystal Display:

It can display test data such as voltage, current, capacity, time, power, and energy.

Computer Connection Interface:

Dedicated USB to TTL Serial Cable (MiniUSB Port, Not Ordinary USB Cable)

Maximum Discharge Power:

85W, 20A within 4.2V, 10A within 8.4V, Less than 10A at Higher Voltage.

Package List:

1 x Battery Tester :

2 x Test Line :

1 x USB to TTL Cable :

1 x Adapter :

1 x Power Cord :

1 x Manual :

Note:

This model product does not support Ni‑MH and Ni‑Cd charging. :