Specifikacija

- Material Compositions:

Sn 99%, Ag 0.3%, Cu 0.7%.

- Melting Point:

217 ℃ (422.6 ℉).

- Rosin Core:

Flux 2.0%.

- Elongation Rate:

58%.

- Expansion Rate:

78%.

- Solder Net Weight:

100 grams (0.22 lbs / 3.53 ounces).

- Solder Wire Diameter:

0.8 mm (0.0315 inch).

- Solder Wire Length:

about 28.5 meters (93.5 feet).

· Package Included:

1x Solder Wire Spool :

· Soldering Tips:

1. Heat up the soldering iron. :

2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. :

3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. :

4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. :

5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. :

6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. :

7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done. :